The NRS-AP10 is a cutting-edge 802.11ac Ceiling Wireless Access Point that operates on SNMP/CAPWAP Protocol. Specifically crafted for residential and small commercial applications, this device adheres to IEEE 802.11ac/n/g/b standards. Boasting a dual-radio system with frequencies at 2.4GHz and 5GHz, it achieves impressive data rates of up to 733Mbps (300Mbps in 2.4G, 433Mbps in 5G). With high-gain 5dBi antennas, the NRS-AP10 extends coverage up to four times more than traditional Access Points, ensuring robust connectivity across diverse environments. This access point stands as a sophisticated solution for modern wireless networking needs.


NRS-AP10 (750Mbps Dual-Radio Ultra Wide Range Wireless Access Point)

Full Management by Smart Router
The NRS-AP10 can be automatically controlled and powered by the NRS-RC1 Smart Router.
Together with the Niveo NRS-RC1, installers are able to create full WiFi coverage, that is centrally managed and controlled by the
router/controller. Easy remote management can be done using the Niveo Smartlink© cloud server.

Seamless Roaming
Managed by the Smart Router/Controller, even moving from living room to bedroom, upstairs or downstairs, users will seamlessly switch between each NRS-AP10 and keep a high speed Internet connection.

Easy set up
The NRS-AP10 in combination with the NRS-RC1 router requires zero configuration in large quantity installations. Without the NRS-RC1, the easy to understand GUI will allow any installer to do a fast and secure set up.

Conveniently powered by PoE
The NRS-AP10 can be conveniently powered by IEEE 802.3af PoE, so no additional cabling is required, simply by connecting to the NRS-RC1 smart router or NRS5FE switch. An optional DC adapter is available .

Tech Specs

Tech Specifications

Attribute Specification
Model NRS-AP10
CPU Qualcomm Atheros
Flash 16MB
Antenna Build in 5dBi MIMO Antenna
PoE Power PoE: IEEE 802.3af, 15W(Full Load)
DC: 12V/1.5A
Interface 1 * 10/100 Mbps RJ45 WAN Port
1 * 10/100Mbps RJ45 LAN Port
1 * Reset button, press 15 seconds to revert to default setting
Reset Reset Button, press 10 seconds to revert to default data.
Bandwidth 20Mhz, 20/40Mhz, 80Mhz
Operation Mode Gateway, Wireless AP, Repeater, WISP
No of SSID 4 SSID for 2.4G, 4 SSID for 5.8G
Operating Temperature 0 to 40℃ / 32 to 104ºF
Storage Temperature -20 to 90℃ / -4 to 194 ºF
Humidity 10 to 90% RH (non-condensing)
Certifications FCC Class A, CE