8- Rear port Full L2/L3 Management, plus 2 SFP open slot, Gigabit PoE + Switch (130W)

Description

IEEE 802.3at Power over Ethernet (PoE) ports
The switch features 8 IEEE 802.3at Power over Ethernet (PoE) ports supplying up to 30 watts per port. This product can convert standard 100~240V/AC power into low-voltage DC that runs over
existing LAN cable to power up IEEE 802.3at compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3at compliant, or only
the data will be sent through LAN cable. By adding the switch to the existing networking, installing networking products such as Access Points and IP cameras can be easily managed and
set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.

2 Gigabit SFP Open Slots
The switch supports 2 additional SFP open slots to uplink to servers, storage, or other switching devices for long loop reach applications. The 2 SFP slots can support different types, speed and distance SFP transceivers. It also supports legacy 100M SFP transceiver. If the 100M fiber infrastructure is constructed and 100M bandwidth is enough, the 100M SFP transceiver can be an
optional choice for the legacy 100M network environment.

Full Layer 2+ Management Features
The switch includes full Layer 2+ Management features. The software set includes up to 4K 802.1Q VLAN and advanced Protocol VLAN, Private VLAN, MVR…advanced VLAN features. There are 8 physical queues Quality of Service, IPv4/v6 Multicast filtering, Rapid Spanning Tree protocol to avoid network loop, Multiple Spanning Tree Protocol to integrate VLAN and Spanning Tree, LACP, LLDP; sFlow, port mirroring, cable diagnostic and advanced Network Security features. It also provides Console CLI for out of band management and SNMP, Web GUI for in band Management.

Advanced Security
The switch supports advanced security features. For switch management, there are secured HTTPS and SSH, the login password, configuration packets are secured. The port binding allows
to bind specific MAC address to the port, only the MAC has the privilege to access the network. The 802.1X port based Access Control, every user should be authorized first when they want to
access the network. AAA is the short of the Authentication, Authorization and Accounting with RADIUS, TACAS+ server. Layer 2+ Access Control List allows user to define the access privilege
based on IP, MAC, Port number…etc.

Tech Specs

Tech Specifications

Interface
10 Base-T /100 Base-TX /1000 Base-T RJ45 Ports 8
10G SFP+ Slot 2
Console Port for CLI Management 1
System Performance
MAC Address Table Size 8K
Buffer Memory 4Mbits
Forwarding Rate 14.22GB
Switching Capacity 20Gbps
PoE Features
IEEE 802.3 af/at/bt IEEE 802.3 af/at
Number of PSE Ports 8 Ports
PoE Mode 130W /235W X version
Max. Power Consumption 310W
External/Internal Power Internal Power
Power Feeding Detecting Capability on PD
PD Alive Check
PD Classification
PoE Scheduling
Power Management (per port)
Enable/Disable PoE per port
Priority setting per port
Power Level Setting per port
Overloading Protection
L2 Features
Auto-negotiation
Auto MDI/MDIX
Flow Control (duplex) 802.3x (Full)
Back-Pressure (Half)
Spanning Tree IEEE 802.1D (STP)
IEEE 802.1w (RSTP)
IEEE 802.1s (MSTP)
VLAN VLAN Group 4k
Tagged Based
Port-based
Q-in-Q
Voice VLAN
Link Aggregation IEEE 802.3ad with LACP
Static Trunk 5
Max. LACP Link Aggregation Group/td> 8
IGMP Snooping IGMP Snooping v1/v2/v3 Supports 1024 IGMP groups
IGMP Static Multicast Addresses Supports 1024 static multicast addresses
IPv6 MLD Snooping Supports 1024 MLD groups
MLD Static Multicast Addresses Supports 1024 static multicast addresses
Storm Control (Broadcast/Multi-cast/Un-known Unicast)
DHCP Server by VLAN
Jumbo Frame Support 9.6KB
Static Routing Up to 16 Static Routes
QoS Features
Number of priority queue 8 queues/port
Rate Limiting Ingress Yes, 1KBps/1pps
Egress Yes, 1KBps/1pps
DiffServ (RFC2474 Remarking)
Scheduling (WRR, Strict, Hybrid)
COS IP ToS precedence, IP DSCP
IEEE 802.1p
Security
Management System User Name/Password Protection
User Privilege Set user privilege up to 15 Level
Port Security (MAC-based)
IEEE 802.1x Port-based Access Control
ACL (L2/L3/L4)
IP Source Guard
RADIUS (Authentication, Authorization, Accounting)
TACACS+
HTTP & SSL (Secure Web)
SSH v2.0 (Secured Telnet Session)
MAC/IP Filter
Management
Command Line Interface (CLI)
Web Based Management
Telnet
Access Management Filtering SNMP/WEB/SSH/TELNET
Firmware Upgrade via HTTP
Dual Firmware Images
Configuration Download/Upload
SNMP (v1/v2c/v3)
RMON (1,2,3,&9 groups)
DHCP (Client/Relay/Option82/Snooping)
System Event/Error Log
NTP/LLDP
Cable Diagnostics
IPv6 Configuration
Port Mirroring Many to One
Mechanical
Power Input 100~240VAC
LED Power, PoE, Link/Act, SFP
LED Power, PoE, Link/Act, SFP
Dimension (H*W*D) 44*330*210 mm
Operating Temperature 0~45°C
Operating Temperature 0~45°C
Storage Temperature -20~80°C
Operating Humidity 5~90% (non-condensing)
Weight 2.2KG
Certification CE, FCC cULus