NGSME48T4HX

Description

The switch is 48-port 10 Base-T /100 Base-TX /1000Base-T + 4 x 10 Gigabit SFP+ Ports Rack-mount L2+ Full Management Network
Switch that is designed for medium or large network environment to strengthen its network connection. The switch supports 176G non-blocking switch fabric, the 48 gigabit ports and 4
uplink 10G ports can transmit and receive data traffic without any lost. The EEE feature reduces the power consumption when there is no traffic forwarding even port is still connected. The
switch also supports Layer 2+ full management software features. These features are powerful to provide network control, management, monitor and security feature requests. Including rackmount brackets, the 19″ size fits into your rack environment. It is a superb choice to boost your network with better performance and efficiency.

4 10-Gigabit SFP Open Slots
The switch equips with 4x 10G SFP+ open slots as the uplink ports, the 10G uplink design provides an excellent solution for expanding your network from 1G to 10G. By 10G speed, this product provides high flexibility and high bandwidth connectivity to another 10G switch or the Servers, Workstations and other attached devices which support 10G interfaces. The user can also aggregate the 10G ports as Trunk group to enlarge the bandwidth.

Full Layer 2+ Management Features
The switch includes full Layer 2+ Management features. The software set includes up to 4K 802.1Q VLAN and advanced Protocol VLAN, Private VLAN, MVR…advanced VLAN features. There are 8 physical queues Quality of Service, IPv4/v6 Multicast filtering, Rapid Spanning Tree protocol to avoid network loop, Multiple Spanning Tree Protocol to integrate VLAN and Spanning Tree,
LACP, LLDP; sFlow, port mirroring, cable diagnostic and advanced Network Security features. It also provides Console CLI for out of band management and SNMP, Web GUI for in band Management.

Designed for Video-over-IP applications
The switch management Layer 3 functionality has been optimized for use with Video over IP applications. Easy to configure and with a nonblocking architecture. With the total of 40Gb uplinks/virtual stacking ports per switch, Video over IP designs of up to 144 end points can be supported.

Advanced Security
The switch supports advanced security features. For switch management, there are secured HTTPS and SSH, the login password, configuration packets are secured. The port binding allows
to bind specific MAC address to the port, only the MAC has the privilege to access the network. The 802.1X port based Access Control, every user should be authorized first when they want to
access the network. AAA is the short of the Authentication, Authorization and Accounting with RADIUS, TACAS+ server. Layer 2+ Access Control List allows user to define the access privilege
based on IP, MAC, Port number…etc.

IEEE 802.3at Power over Ethernet (PoE) ports
This product can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE
802.3at/af compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3at/af compliant, or only the data will be sent through LAN cable. By adding the switch to the existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up.

PD Monitoring: Self-healing Intelligent PoE ports
When this function is enabled, the NGSME48T4H will detect a network PoE powered device (for example, an IP CAM) with a set of IP address periodically. If the switch doesn’t get any replies from the network PoE powered device, NGSME48T4H will do a
power cycle (PoE power OFF, and PoE power ON) to the port that connects the network PoE powered device, allowing that device to reboot. You can set the frequency of detecting, number of times of detecting, and the time period to perform power cycle when there’s no reply via the switch’s PoE configuration web page.