The NRS-AP10 is a cutting-edge 802.11ac Ceiling Wireless Access Point that operates on SNMP/CAPWAP Protocol. Specifically crafted for residential and small commercial applications, this device adheres to IEEE 802.11ac/n/g/b standards. Boasting a dual-radio system with frequencies at 2.4GHz and 5GHz, it achieves impressive data rates of up to 733Mbps (300Mbps in 2.4G, 433Mbps in 5G). With high-gain 5dBi antennas, the NRS-AP10 extends coverage up to four times more than traditional Access Points, ensuring robust connectivity across diverse environments. This access point stands as a sophisticated solution for modern wireless networking needs.
Description
NRS-AP10 (750Mbps Dual-Radio Ultra Wide Range Wireless Access Point)
Full Management by Smart Router
The NRS-AP10 can be automatically controlled and powered by the NRS-RC1 Smart Router.
Together with the Niveo NRS-RC1, installers are able to create full WiFi coverage, that is centrally managed and controlled by the
router/controller. Easy remote management can be done using the Niveo Smartlink© cloud server.
Seamless Roaming
Managed by the Smart Router/Controller, even moving from living room to bedroom, upstairs or downstairs, users will seamlessly switch between each NRS-AP10 and keep a high speed Internet connection.
Easy set up
The NRS-AP10 in combination with the NRS-RC1 router requires zero configuration in large quantity installations. Without the NRS-RC1, the easy to understand GUI will allow any installer to do a fast and secure set up.
Conveniently powered by PoE
The NRS-AP10 can be conveniently powered by IEEE 802.3af PoE, so no additional cabling is required, simply by connecting to the NRS-RC1 smart router or NRS5FE switch. An optional DC adapter is available .
Tech Specs
Tech Specifications
| Attribute | Specification |
|---|---|
| Model | NRS-AP10 |
| CPU | Qualcomm Atheros |
| Flash | 16MB |
| SDRAM | 128MB DDR2 RAM |
| Antenna | Build in 5dBi MIMO Antenna |
| PoE Power | PoE: IEEE 802.3af, 15W(Full Load) DC: 12V/1.5A |
| Interface | 1 * 10/100 Mbps RJ45 WAN Port 1 * 10/100Mbps RJ45 LAN Port 1 * Reset button, press 15 seconds to revert to default setting |
| Reset | Reset Button, press 10 seconds to revert to default data. |
| Bandwidth | 20Mhz, 20/40Mhz, 80Mhz |
| Operation Mode | Gateway, Wireless AP, Repeater, WISP |
| No of SSID | 4 SSID for 2.4G, 4 SSID for 5.8G |
| Operating Temperature | 0 to 40℃ / 32 to 104ºF |
| Storage Temperature | -20 to 90℃ / -4 to 194 ºF |
| Humidity | 10 to 90% RH (non-condensing) |
| Certifications | FCC Class A, CE |
