NGSME8F2XU

Description

IEEE 802.3at/af/bt Power over Ethernet (PoE) Ports
This product can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3at/af/bt compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3at/af/bt compliant, or only the data will be sent through LAN cable. By adding the switch to the existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.

IEEE 802.3bz NBASE-T 2.5G Ports
Based on the existing Gigabit Ethernet and 10 Gigabit Ethernet standards, all 8 of NGSME8F2xu’s RJ45 ports’ transmitting speed can reach 2.5G with CAT-5E cables, far exceeding the 1 Gigabit transmitting speed that is common seen in other switches.

2 10 Gigabit SFP+ Open Slots
The switch equips with 2 10G SFP+ open slots as the uplink ports, the 10G uplink design provides an excellent solution for expanding your network from 1G to 10G. By 10G speed, this product provides high flexibility and high bandwidth connectivity to another 10G switch or the Servers, Workstations and other attached devices which support 10G interface. The user can also aggregate the 10G ports as Trunk group to enlarge the bandwidth.

Full Layer 2/3 Management Features
The switch includes full Layer 2/3 Management features. The software set includes up to 4K 802.1Q VLAN and advanced Protocol VLAN, Private VLAN, MVR…advanced VLAN features. There are 8 physical queues Quality of Service, IPv4/v6 Multicast filtering, Rapid Spanning Tree protocol to avoid network loop, Multiple Spanning Tree Protocol to integrate VLAN and Spanning Tree,
LACP, LLDP; sFlow, port mirroring, cable diagnostic and advanced Network Security features. It also provides Console CLI for out of band management and SNMP, Web GUI for in band Management.

Advanced Security
The switch supports advanced security features. For switch management, there are secured HTTPS and SSH, the login password, configuration packets are secured. The port binding allows binding specific MAC address to the port, only the MAC has the privilege to access the network.
The 802.1X port based Access Control, every user should be authorized first when they want to access the network. AAA is the short of the Authentication, Authorization and Accounting with RADIUS, TACAS+ server. Layer 2/3 Access Control List allows user to define the access privilege based on IP, MAC, Port number…etc.

PD Alive Check
When this function is enabled, NGSME8F2xu will detect a network PoE powered device (for example, an IP CAM) with a set of IP address periodically. If the switch doesn’t get any replies from the network PoE powered device, NGSME8F2xu will do a power cycle (PoE power OFF, and PoE power ON) to the port that connects the network PoE powered device, allowing that device to reboot. You can set the frequency of detecting, number of times of detecting, and the time
period to perform power cycle when there’s no reply via the switch’s PoE configuration web page.