8-port Full L2 Management, plus 2 SFP open slot, Gigabit PoE + Switch (130W)
Description
Convenient Design for AV and IT
The NGS-Series offers switches in both front and rear port configurations for easy patching and clean looking finish in AV-racks:
Supporting Video-Over-IP Solutions: Small to extremely large
The Niveo Managed NGSM(E)-Switches are optimized for Video-over-IP, providing multicasting with IPGM Querier and Fast Leave to support very crisp switching of channels. The switches support any mainstream Video-over-IP Solution: With the advanced Niveo Professional Virtual Stacking feature, the switches support Video-over-IP designs up to 2300-endpoints!
QSC Q-SYS Audio/Video Qualified
The entire managed switch series has been qualified for QSC Q-SYS audio and video and is currently the only vendor that can make that claim.
Supporting Audio Distribution
All managed Niveo switches support most common industry standard Audio and Video distribution Protocols:
Unparalleled PoE-features: No more locked up PoE devices! No more locked up Control Panels, frozen IP Cams or non responding microphones! No more customer complaints and Physical resets! Many PoE-powered devices are prone to lock ups due to power fluctuations. With the Niveo Professional NGSM-PoE switches, this is no longer an issue. The switches prevent most freezes and automatically corrects them:
Line Filtering The unique Niveo line-filtering in the Managed PoE+ switches remove most power fluctuation and prevents most lock ups of PoE-devices. Self-Healing PoE The Niveo
Self-Healing PoE feature automatically monitors any device it gives PoE power to and, in case of a locked-up device, it will automatically power cycle that particular port, correcting over 99% of these issues.
Power Scheduling
Installing a network with energy saving targets? The Niveo Professional Switches help out with the Power Scheduling feature. The easy to use scheduler let you make the switch turn down PoE on ‘idle’ hours and fire it up when needed.
Reduced Fan Noise
The Niveo Professional Switches actively manages the fan speeds. Reducing the speed when possible to limit the noise to a minimum and rev it up when needed.
Check the cables
Experiencing unexpected loss of Data or Power or you do not trust existing category cable? The Niveo VeriPhy feature can check the integrity of connected Category cables. The switches can check through the resistance on the cable the likelihood of compromised capacity.
Unparalleled Quality and Warranty
All Niveo NGS-switches are designed and constructed with true enterprise grade chipsets and components, to assure extreme durability and reliability needed for corporate networks. With MTTF measures well over 100.000 hours, these switches are designed to compete with Cisco Catalyst, Extreme Networks and Juniper switches and to stand out by great length against retail grade products from companies like Cisco SMB, Netgear, TP-Link and Luxul. The manufacturing and quality standards go above and beyond its peers to assure the highest quality products. Every switch that leaves the factory goes through a rigid 72 hour stress testing, to make sure all functions meet the requirements. Niveo Professional is proud to offer 10 Years limited warranty upon registration of the unit.
Ultimate Installer Support
All Niveo Switches come included with lifetime access to software updates and support, without any additional costs for care packs. The Niveo Switches come the ultimate installer support, making networking design and configuration a light breeze.
Support team is proud to assist integrators with:
- Network design advise
- Configuration assistance
- Creating configuration files
- Trouble shooting
Tech Specs
Hardware Specification | ||||
Interface |
Total Port | 10 | ||
10/100/1000 Mbps | 8 | |||
Gigabit SFP | 2 | |||
Autonegotiation and Auto-MDIX | Yes | |||
Flow Control |
Backpressure for half duplex,
802.3x for full duplex |
|||
Console (RS-232) | Yes | |||
LED |
System (State / Color) | Y | ||
Port (State: Link/Act / Color) | Y | |||
PoE (State: On / Color) | Y | |||
System |
CPU | 416MHz | ||
Flash | 16MB | |||
SDRAM | 128MB | |||
Packet Buffer | 4Mb | |||
Switching Capacity | 20/36/52Gbps non-blocking | |||
Forwarding Architecture | Store and forward | |||
Package Forwarding Rate | 14.8/26.8/38.7Mpps (@ 64bytes) | |||
MAC Address Table | 8K | |||
Jumbo Frame | 9K | |||
PSE Ports |
Port Volume | 8 | ||
PoE Capability | 30W (802.3at) | |||
Total PSE Power | 140 (Current Share) | |||
Power through RJ-45 pin | Pair1,2 / 3,6 | |||
Power Requirement
/ Consumption |
AC Input | 100-240V AC, 50/60Hz | ||
Consumption – not include PSE | 10W | |||
Environment |
Operating Temperature/ Degree C | 0~40 | ||
Relative Humidity at operating | 5~90% (non-condensing) | |||
Storage Temperature / Degree C | -20~80 | |||
Relative Humidity at storage | 5~90% (non-condensing) | |||
Mechanical |
Dimension mm(H*W*D) | 44*330*210 | ||
Weight | 2.45kg | |||
Regular Compliance | CE, FCC Part 15 Class A | Yes |
Software Specification |
|
Standard |
IEEE 802.3 – 10Base-T |
IEEE 802.3u – 100Base-TX | |
IEEE 802.3ab – 1000Base-T | |
IEEE 802.3z – 1000Base-SX/LX | |
IEEE 802.3x – Flow Control | |
IEEE 802.1Q – VLAN | |
IEEE 802.1p – Class of Service | |
IEEE 802.1D – Spanning Tree | |
IEEE 802.1w – Rapid Spanning Tree | |
IEEE 802.1s – Multiple Spanning Tree | |
IEEE 802.3ad – Link Agregation Control Protocol (LACP) | |
IEEE802.1v – Protocol VLAN | |
IEEE 802.1AB – LLDP (Link Layer Discovery Protocol) | |
IEEE 802.1X – Access Control | |
IEEE 802.3at – Power over Ethernet | |
IEEE 802.3af – Power over Ethernet | |
Port Configuration |
Link State, Speed/Duplex, Auto-Nego, Flow Control |
Rate Control/Limit | |
VLAN |
Port based and 802.1Q Tag based VLAN |
Maximum 4K VLAN Group, 4096 VLANs ID | |
QinQ | |
Private VLAN | |
MVR (Multicast VLAN Registration) | |
MAC based VLAN | |
IP Subnet-based VLAN | |
IEEE802.1v Protocol VLAN | |
Voice VLAN | |
QoS |
4 Physical priority queues |
Scheduling – WRR, Strict, WRR+SP | |
CoS: Port based, 802.1p, DSCP, TCP/UDP Port based | |
Storm Control (Broadcast, Multicast, unknown Unicast) | |
Link Agragation |
Static and 802.3ad LACP |
Static Trtunk | |
Hash Algorithm Type (DA, SA, DA+SA MAC-based, SIP…) | |
Loop Protection | Protect the unexpected network loop by shutdown port |
Spanning tree |
IEEE 802.1D – Legacy Spanning Tree |
IEEE 802.1w – Rapid Spanning Tree | |
IEEE 802.1s – Multiple Spanning Tree | |
BPDU Guard, BPDU Filtering | |
Multicast |
IGMP Snooping v1/v2/v3, MLD(IPv6) Snooping v1/v2 |
Maximum 8K Multicast Groups | |
IGMP/MLD Querier, Router Port, Proxy, Immediate Leave | |
Traffic Mirroring |
Port Mirror (1 to 1, 1 to N, N to 1) |
sFlow | |
MAC Address Table |
Dynamic MAC address management |
Static MAC address | |
Security |
Port Security (MAC-Port,
IP-MAC-Port Binding) |
802.1x authentication (Port based,
MAC address based) |
|
User Name Password
Authentication by Local/Radius… |
|
Up to 15 User Privilege Levels | |
Access Management by IP | |
IP Source Guard | |
RADIUS | |
TACACS+ | |
Guest VLAN | |
DoS Defence | |
SSHv1/SSHv2 | |
SSLv2/SSLv3/TLSv1 | |
Access Control List (L2/L3/L4) | |
Management |
Web GUI Management, CLI (Console/Telnet/SSH) |
DHCP Client, Snooping, Relay/Option 82, BOOTP | |
SNMP V1/V2c/V3, Trap, RMON | |
Firmware upgrade by TFTP/HTTP | |
Configurration Backup/Reload | |
Link Layer Discovery Protocol (LLDP) by lPv4/v6 types | |
System Log for event, warning and information | |
NTP |
Maintenance |
VeriPHY Diagnostic |
IPv4/V6 Ping Diagnostics | |
CPU Monitor | |
PoE Specification |
Per port POE State Enable/Disable |
Maximum system/port PoE power seting | |
Port power priority setting | |
PD Status monitoring |